A fun little project if you're into laser cut wood.I bought this for a secondary dice tower, so I can have my own when I'm DMing.The only reason I gave it 4/5 is because it is screwed together using tiny screws, and the screw driver supplied doesn't seem to be the proper size. I believe with a slight redesign so that you glue it instead of screw it it would be perfect. The placement of the screws could be a little better too. On the back and the front face of the tower the screws are located at the level of the thin bricks. If you don't angle them onwards a bit then the screw will pop up the thin brick. It's only something you'll notice if you look really close, but relocating those screws that are on the thin bricks and moving them down like 4mm to the thick bricks would solve this issue.All in all. It was fun to put together and works as it should. My roommate thinks the free gift Sorcerer is super cute too.

Smaller than I thought. A pain in the ass to put together. Totally worth it. Great dice roller.

Instructions require a fair bit of common sense/handiness, but definitely doable. Nice addition for quality of life for those pesky dice rolls during board games.

For such a cheap price this is a very well-made dice tower! Assembly took quite a while (about an hour and a half) as I had to restart because the instructions aren't very clear. Be gentle with the screws or they may split the wood. I loved the foldable aspect, though! Made it much easier to wrap and gift my boyfriend.

For such a cheap price this is a very well-made dice tower! Assembly took quite a while (about an hour and a half) as I had to restart because the instructions aren't very clear. Be gentle with the screws or they may split the wood. I loved the foldable aspect, though! Made it much easier to wrap and gift my boyfriend.

I really liked the details and ease of construction. Was small than I thought it would be, but works great.

This was supposed to be a gift, but I got one for myself as well because it's a great design, perfect for painting, and is inexpensive but not cheap. The assembly is tricky, trying to hold the pieces where they need to go while screwing them together, and two screws broke through the front of the tower during assembly for both me and my giftee, so pre-drilled screw holes in all the pieces would make it much easier. We probably could have used glue to hold them in place first, but weren't sure whether we would paint before or after assembly. Regardless, it functions well, is lightweight and very portable, and the rest of my party is impressed with it!

This product is nice. It is not very portable but is what I ordered.

These are smaller than I imagined. Thankfully most of the holes are pre-drilled, however I still had some splitting issues. Be sure to be careful with them, as they are fragile!

Fairly easy assembly, rolls dice, budget quality for a budget price

Being one of three dice towers bought as my first experience with them, I wasn't really sure what to expect. I've seen laser cut terrain and accessories, but this was also my first time working with and assembling one. Needless to say, when I opened the small box and saw a tiny screwdriver and screws, I was a little surprised. Though the tower is rather easy to assemble, the instruction card is very clear, and if not, has a QR code for their website for an assembly video. *I will note, when I tried to go to their website, Chrome had an absolute fit about it being a .me site, but they have the video available on youtube as well.* But it goes together pretty much how you see it.Build the base, pieces slot in and are held in by tiny screws *little screwdriver you get is also magnetic, thank you so much CZYY, I can't imagine how many of the screws I'd have lost otherwise* in pre-drilled holes, and assemble the tower next. The ramps slot in place without screws, and the tower walls secure them in. I had only one hiccup when building the dice tower and that was one of the pre-drilled holes was too close to the edge of the wall, and i had to hand turn it in a little more centered, but with such a small screw, it's not a big deal. Also, probably because I live in a hot climate, some of the pieces are slightly warped, not enough to be notice-able, but it does wobble slightly on it's base, and prevent the dice tower from being able to fold down into it's base for travel. But I wouldn't fault that on construction. It still works very well, though what you might expect from laser-cut wood, the clattering of dice is surprisingly loud down the ramps, but it's a very compact tower and certainly a nice little project.

Assembled easily. Some of the edges were a bit rough but nothing some sandpaper can’t fix. It came with a few extra screws in case you lose one (important, as they’re on the small side).

As I was assembling the tower I discovered they packed two back panels and not two side panels. I've requested a replacement and will update upon arrival.Update: After a swift replacement I was able to put the tower together with no further issues. I suggest using a little rubber cement to help keep everything snug. The small screws don't bite into the wood enough for a strong hold.

Like other reviews have stated, some of the drilled screw holes are not well aligned, and some are drilled quite close to the outer surface of the panel where the etching is. This is thin wood too. All that said, if care and some precision is practiced while putting this together, it very much *will* assemble without too much trouble and without damaging the outer decoration much - if at all.Once assembled, it works as advertised. Here's my pros and cons:Pros:* Assembly isn't difficult* Seems sturdy once built* Dice roll through without issue* Small, so it doesn't take much space.Cons:* Small, so you're not going to dump 20 d6 down it in one go. 10 d6 is ok though, in my experience.* It's wooden, so it's a little noisy.* Positioning of pre-drilled screw holesOverall I'd buy this again for myself or as a gift. It's not perfect, but it's not super expensive and gets the job done while looking kinda cool.

This is a 4.5 star review, which I must unfortunately round down to 4. 0.5 was lost because a couple of pieces were slightly misaligned. In no way does this affect the usability of the finished product, and I am very happy with it.I assembled it without painting/staining/laquering or anything. It was really easy to put together, and looks fantastic on my desk. I love the sound the dice make as they bounce down the tower. I love that I even had to put it together, as it feels more like its mine to me, even though I didn't alter or decorate it. For the price, you really can't go wrong here.

Little warped when I got it but not to bad, just hard to close the thing, there also wasnt any instructions, other than that great product, very happy with it

This is a fun kit. Relatively easy to assemble and lots of potential for customization. I decided to apply a light maple wood stain before assembling and it really made a difference in the overall look. I see where some have had trouble getting the screws to line up. I think this is because the larger pieces have a tendency to bow a little. I’m not sure if mine were bowed out of the box or if that happened while is was staining them. But if you don’t pay attention to that, there’s a good chance your screws won’t line up. It if you take it slow, put the screws in one at a time as you bend the pieces into alignment, everything goes together just fine. I also used a little wood glue on the edges to help hold it together.Standard size dice tumble through this without any problem. My only complaint is that I wish it would tumble them a little more. Maybe making the surface of the ramps a little rougher to encourage the tumbling or have one of the ramps turn 90 degrees might help. That being said, I’m getting fairly random results on the dice I toss in there.

First and foremost the dice tower is great and after some minor DIY engineering/fixes my final product fully assembled is solidly built and fully functional.The instructions were entirely pictures and in color. We had no problems understanding what went were and all the screw holes were predrilled and the lined up...sort of :(Here’s my dong on the product and I would like to say that this is only my experience with the product, I only bought one so maybe if I would have sent this one back the pieces would have been perfect? But a few of the prices in my set were warped and not exactly straight. This quality control issue caused some minor difficulty in putting the prices together without breaking the pieces when I tried to screw them together. The screws are VERY tiny but they did include a magnetic screw driver that worked perfectly. Due to the warping I decided I would also glue the pieces together so that I wasn’t relying on just the screws to hold it together. The glue will make this piece last MUCH longer. I used some small hand clamps to hold the pieces in place with the glue dried. The warped pieces caused the screw holes to not line up exactly and the wooden pieces are only 1/4” thick so even slightly off caused 2 of the screws to break through the visibly side. I simply glued the pieces back in place and hand clamped the area until the glue dried.We tested the dice tower and it works perfectly. The inside angled steps which cause the dice to tumble are securely attached using the die cut tongue and groove. I also glued those in place.When your finished you have two sections that go together to form the tower and dice corral where the dice finish their tumble. The two pieces do fit together tightly and by the friction of the two pieces hold together well. You can separate the two pieceS for easy storage and transport; however...you guessed it, I glued those bad boys together. LOL. The tower is not that big when constructed and we won’t be transporting it very much, if at all. I glued it because I can see the two pieces wearing down after constant putting together and taking apart And losing the friction fit.I am very happy with my purchase even though I had to DIY engineer/fix the final product. We will use the dice tower every game now. I really bought it for the kids so they would get more excited about wanting to play. I think it did the trick LOL. I just may purchase another one for the dungeon master to use.I would recommend this dice tower. I just hope I got a dud set and others get straight pieces in their set.

This is a little flimsy when putting it together, but sturdy once assembled. I gave this as a gift to my tabletop gamer girlfriend and she loves it!

This is very nice and fun to put together.